放大招！[储运网原创]PDMS元件库编号精心整理-SKEY AND CATA_NO. OF PARAGON

helloshigy

这是油气储运网精心整理的PDMS 元件库常用元件的编号 SKEY， 附有详细说明及编号原理。应该对大家建立数据库有所帮助。

下载的pdf显示的非常好，建议下载观看。

PDMS元件库编号精心整理-SKEY AND CATA_NO. OF PARAGON.pdf (435.53 KB, 下载次数: 273, 售价: 10 金币)

2017-2-28 13:33 上传

点击文件名下载附件
售价: 10 金币  [记录]

NOTE:

CATALOGUE NO. IS COMPOSED OF SEVEN NUMBERS (①-⑦);

FITTINGS AND VALVES RULES：    ⑤: 1-PE; 2-BW; 3-SW; 5-FNPT; 6-MNPT; A-FF; B-RF;  R-RTJ;    ⑥P: A-125#; B-150#; D-300#; F-600#; X-800#; G-900#;  H-1500#; J-2500#; K-5000#; 2-2000#; 3-3000#; 6-6000#; 9-9000#; 0-NOT  SPECIFIED;    ⑦WT: A-SCH 5S; B-SCH 10S; C-SCH10; D-SCH20;  E-SCH30; F-SCH40S; G-SCH40; H-SCH60; J-SCH80S; K-SCH80; L-SCH100; M-SCH120;  N-SCH140; P-SCH160; Q-STD; R-XS; S-XXS;
SKEY	SHORT CODE	SIZE	CATA NO.	DESCRIPTION	EXPLANATION OF CATA NO.
NULL	PIPE		AAPA100	PE	①②: AA-B36.10; ③: P-PIPE; ④: A-SEAMLESS NOTE: ONLY THIS NO. AVAILABLE
NULL	PIPE		AAPA200	BW
FPPL	NIPPLE		00NPB0S	PE×PE, XS	③④: NP-PIPE NIPPLE; NS-SWAGED NIPPLE, CON.;  NS-SWAGED NIPPLE, ECC.⑤: A-PE×BE; B-PE×PE; C-PE×NPT; E-NPT; J-NPT×BE; P-BE×BE;  L-NPT×PE; N-BE×PE    NOTE: MOST CATA NO.  ENDS WITH “S”    NOTE: SKEY “CS” MEANS  “CONCENTRIC SWAGE FROM PIPE”; SKEY “ES” MEANS “ECCENTRIC SWAGE FROM PIPE”;
CSBW	SWAGED NIPPLE, CON.		00NSN0S	BE×PE, XS
ESBW	SWAGED NIPPLE, ECC.		00NEN0S	BE×PE, XS
RNSC	SWAGED NIPPLE, CON.		00NSC0S	PE×MNPT, XS
RESC	SWAGED NIPPLE, ECC.		00NEC0S	PE×MNPT, XS
ELSW	ELBOW 90LR		NULL		①②: AA-B16.9; AB-B16.11    ③: E-ELBOW
ELBW			AAEA200	BW
ELSW	ELBOW 90SR		ABEB360	SW, 6000#
ELBW			NULL
ELBW	ELBOW 45LR		ABEC360	SW, 6000#
ELSW			AAEC200	BW
RCBW	REDUCER,  CON.		AARC200	BW	①②: AA-B16.9; ③: R-REDUCER    ④: C-CONCENTRIC; E-ECCENTRIC
REBW	REDUCER,  ECC.		AARE200	BW
TESW	TEE 90		ABTA360	SW, 6000#	①②: AA-B16.9; AB-B16.11; BF-BS, BONNEY    ③: T-TEE    ④: A- TEE 90; B-TEE 45;   L- LATROLET; N- NIPOLET;   W- WELDOLET; X- SOCKOLET;   Y-THREADOLET;    NOTE: NO OLETS FOR  ANSI
TEBW			AATA200	BW
SKSW	SOCKOLET		BFTX360	SW, 6000#
WTBW	WELDOLET		BFTW2S0	BW, SCH STD
THSC	THREADOLET		BFTY560	FNPT, 6000#
LASW	LATROLET		BFTL360	SW, 6000#
NISC	NIPOLET		BFTN660	MNPT, 6000#
NIPL			BFTN130	PE, 3000#
TEBW	LATERAL  TEE		BFTB200	BW	①②: BF-BS, BONNEY ③④: TB- LATERAL TEE  NOTE: NO LATERAL TEE FOR ANSI
TEFL			AETBBD0	RF,  300#	①②: AE-B16.5    ③④: TB- LATERAL TEE
TEFL			AETBRF0	RTJ, 900#
TESW			LDTB360	SW, 6000#	①②: LD-LADISH    ③④: TB- LATERAL TEE
TESC			LDTB560	FNPT, 6000#
KASC	CAP  (LONG TYPE)		ABKC560	FNPT, 6000#	①②: AA-B16.9; AB-B16.11    ③: K-CLOSURES    ④: C-LONG CAP; D-SHORT CAP;    N-HEXAGONAL HEAD PLUG    NOTE: ONLY ABKN600  AND BBKN600 AVAILABLE FOR HEX PLUG.
KASW			NULL	SW
KABW			AAKC200	BW
KASC	CAP  (SHORT TYPE)		NULL	FNPT, 6000#
KABW			AAKD200	BW
KASW			A0KD360	SW, 6000#
PL	PLUG	1/8-3”	ABKN600	MNPT
COSW	COUPLING		ABCF360	SW, 6000#	①②: AA-B16.9; AB-B16.11    ③: C-COUPLING ④: F-FULL; H-HALF
FLSW	FLANGE		AAFSRH0	SW/RJ, 1500#	①②: AA-B16.5;    ③: F-FLANGE ④: B-BLIND; S-SW; T-THREADED; W-WN;
FLSC			AAFTRH0	TH/RJ, 1500#
FLWN			AAFWRH0	WN/RJ, 1500#
FLBL	BLIND  FLANGE		AAFBRG0	RJ, 900#
NULL	GASKET		ACGCBBC	RF, 150#	①②: AC-B16.5; ③: G-  GASKET; ④: A-FF; C-RF; F-RTJ; ⑦: C-3MM; G-1.5MM;
NULL			ACGFRG0	RTJ, 900#
NULL			ACGAABG	FF, 150#
(SPECIALLY FOR VALVES)⑦: A-MANUL  90 DEG TURN; L-LEVER; G-GEAR OPERATED; N-NON RISING STEM HANDWHEEL; R-RISING  STEM HANDWHEEL
VBSC	BALL VALVE   (REDUCED  PORT)	1/2-2”	MAVB50A	FNPT, 800#	NOTE: NPT TYPE EXISTS ONLY FOR “MAVB50A” WHICH  SEEMS NOT TO CONFORM TO NUM. SYSTEM.    ①②: MA-MSS SP72; AF-B16.34; PA-API 6D; ③④: VB-VALVE_BALL,  REDUCED PORT; VS- VALVE_BALL, FULL PORT;    NOTE: VALVE FACE TO FACE LENGTH SAME IN B16.34  AND API 6D;
VBFL		1/2-6”	AFVBBBL	RF, 150#, LEVER
VBFL		6-36”	PAVBBBG	RF, 150#, GEAR
VBSC	BALL VALVE   (FULL  PORT)	1/2-2”	MAVB50A	FNPT, 800#
VBFL		1/2-6”	AFVSBBL	RF, 150#, LEVER
VBFL		6-24”	PAVSBBG	RF, 150#, GEAR
VTFL	GATE  VALVE		AAVGBDR	RF, 300#,  HANDWHEEL	①②: AA-16.10; A0-NOT SPECIFIED;    ③④: VG-VALVE_GATE;
VTBW			AAVG2FR	BW, 600#,  HANDWHEEL
VTSW			A0VG3XR	SW, 800#,  HANDWHEEL
VTSC			A0VG5XR	NPT, 800#,  HANDWHEEL
VGFL	GLOBE VALVE		AAVHBDR	RF, 300#,  HANDWHEEL	①②: AA-16.10; A0-NOT SPECIFIED;    ③④: VH-VALVE_GLOBE;
VGBW			AAVH2GR	BW, 900#,  HANDWHEEL
VGSW			A0VH3XR	SW, 800#,  HANDWHEEL
VGSC			A0VH5XR	NPT, 800#,  HANDWHEEL
CKFL	CHECK VALVE   (SWING TYPE)		AAVJBD0	RF,  300#	①②: AA-16.10; A0-NOT SPECIFIED;    ③④: VJ- VALVE_SWING CHECK;    VE- VALVE_PISTION CHECK;
CKBW			AAVJ2B0	BW,  150#
CKSW			A0VJ3X0	SW,  800#
CKSC			A0VJ5X0	FNPT,  800#
CKFL	CHECK  VALVE   (PISTION TYPE)		AAVEBD0	RF,  300#
CKBW			NULL	BW
CKSW			A0VE3X0	SW,  800#
CKSC			A0VE5X0	FNPT,  800#
VNSC	NEEDLE VALVE		VSVN53R	FNPT	①②: VS-IVES    ③④: VN-VALVE_NEEDLE
VNSC			VSVN63R	MNPT
AVFL	ANGLE  VALVE   (GLOBE)		AAVABGR	RF, 900#,  HANDWHEEL	①②: AA-16.10;    ③④: VA- VALVE_ANGLE GLOBE
AVBW			AAVA2FR	BW, 600#,  HANDWHEEL
SPECIAL ITEMS RULES(FORMER RULES NOT APPLICABLE TO THE FOLLOWINGS)
SB	SPECTACLE BLIND		SPOP150RF	150#,  RF, OPEN	SPOP300RF: 300#, OPEN; SPOP600RF: 300#, OPEN;    NOTE: REPLACE “OP” TO “CL” FOR CLOSED TYPE
SB			SPOP900RJ	900#,  RJ, OPEN	SPOP1500RJ, OPEN; SPOP2500RJ, OPEN;    NOTE: REPLACE “OP” TO “CL” FOR CLOSED TYPE
SP	LINE  BLIND   (SLIP PLATE)		SP900RJ	900#,  RJ	150, 300, 600, 900, 1500, 2500# AVAILABLE       NOTE:  ALTERNATIVELY, A0MSB FOR SPECTACLE BLIND, A0MLB FOR LINE BLIND
SR	LINE  SPACER   (SLIP RING)		SR900RJ	900#,  RJ
RP	RESTRICTION  ORIFICE		A0IQBF0	600#,  RF	ALSO NAMED AS “RESTRICTOR PLATE” OR “ORIFICE  PLATE”
EXFL	EXPANSION  BELLOW		00MBBB0	150#,  RF
FYFL	STRAINER(Y  TYPE)		SSMYBB0	150#, RF, SPIRAX STEEL	FY: Y TYPE FILTER    FI: ANGLED FILTER    FA: STRAIGHT-THROUGHT(IN-LINE) FILTER
FIFL	STRAINER(BASKET)		SSMXBB0	150#, RF
FAFL	STRAINER(TEE  TYPE)		A0MZBB0	150#, RF
IDPL	INSTRUMENT  DIAL		NULL		NOTE: CATA NO. TO BE BUILT BY YOURSELF, FOR ME  BULIT AS INST002;    NOTE: ITS STEM PARALLEL WITH FLUID FLOW; USED TO  SHOW INST. TAG_NO. IN MODEL
ARFL	SAFETY  VALVE		DAASBTT	NP100/40 FA.SEMPELL	SKEY DESC.: ANGLED PRESSURE REDUCING VALVE
	SUPPORT		00XS000		NOTE: NO GEOMETRY FOR 00XS000; BUILD IT BY  YOURSELF AS SUGGESTED, FOR ME BULIT AS D0X0001;
PB2D	BEND(PULLED)		00BU000	5D, VAR. ANGLE, BWD	NOTE: NO DIFFERENCE FOUND FROM D0EU200;
MIBW	BEND(MITRE)		00BX203	3-CUT MITRE BEND
MIBW			00BX204	4-CUT MITRE BEND

SKEY RULES:

③④:PL-PLAIN; FL-FLANGED; SW-SOCKETWELD; BW-BUTT WELD; SC-SCREWED; CP-COMPRESSION;

声明：本元件库编号说明由油气储运网（www.youqichuyun.com）helloshigy原创精心整理，欢迎大家学习指点

helloshigy

这是pdf预览图，做的很漂亮！建议下载楼上的pdf。

huohuxinxin

我晕，就没有便宜点的吗？？10金啊！！

helloshigy

huohuxinxin 发表于 2016-4-18 13:50
我晕，就没有便宜点的吗？？10金啊！！

好东西 所以贵啊 哈哈

航天12

好资料，谢谢

helloshigy

航天12 发表于 2016-4-20 10:17
好资料，谢谢

后期还会不断更新 先做出这些

hnan

感觉做的很好的资料，赞一个

helloshigy

hnan 发表于 2016-4-20 10:58
感觉做的很好的资料，赞一个

对快速建立元件库很有帮助
表中都是常用的元件
大家建立paragon元件的时候 只需要输入cata号就行了

zero城

好资料，谢谢

wzfxihou

感谢分享，楼主好人！！！